SRC-350 Residential Gateway PBTV Remote

Power and Volume

In this order, press and hold the SELECT button, then press the MUTE button. Hold BOTH buttons down TOGETHER until the LED button illuminates. Release both buttons as soon as the LED button illuminates.
Press the press the UP ARROW above the SELECT button ONE step at a time until the TV turns off. Each time you press the ARROW button, the LED button will blink. As soon as the TV turns off, stop pressing the ARROW button.
Press MUTE, then:
If your TV turns back on, press SELECT to lock in this code. The LED will blink 3 times and go out.
If your TV does not turn back on; press the DOWN ARROW one step at a time until your TV turns back on. Each time you press the ARROW button; the LED button will blink and remain illuminated.
Once you have found a code that turns the device on/off, press SELECT to lock in this code. The LED button will blink 3 times and go out.

It might take several minutes to cycle through all the codes when using the point and press programming method.

This will only work on your TV that is set to the Channel 3 video stream.

Press MENU or the wrench button ( ) on the Gateway.
A menu will appear on the channel 3 TV. Arrow down on the menu to Remote Control Setup and press Select.
Press the PPV button and the Gateway ID will appear on the screen.

In this order, press and hold the SELECT button, then the MUTE button. Hold BOTH buttons down TOGETHER until the LED button illuminates.
Press and release the D key.
Press 0

In this order, press and hold the SELECT button, then the MUTE button. Hold BOTH buttons down TOGETHER until the LED button illuminates. Release both buttons as soon as the LED button illuminates.
Press and release the B key. The LED button temporarily turns off. Releasing the key causes the LED button to light up again. You can now set the 3 digit gateway id.

In this order, press and hold the SELECT button, then the MUTE button. Hold BOTH buttons down TOGETHER until the LED button illuminates.
Press and release the A key. The LED button temporarily turns off. Releasing the key causes the LED button

Remote Control ID	Operates TV
0	Your TV and Gateway are in the same room and TV is on channel 3
1	Your TV operates on channel 3 and Gateway is in another room
2	Your TV operates on channel 10
3	Your TV operates on channel 13